Description
TMD series mold sweat dehumidifiers are primarily used in plastic molding to prevent the moisture from condensing on the surface of mould. Moisture condensation happens when the temperature of mould surface is lower than the dew point temperature of the air, and is due to the use of chilled water for reducing the cycle time of moulding, particularly moulding of PET preforms. Moisture condensation will not only have a negative impact on the product quality and production efficiency, but also corrode the mold surface, thereby causing environmental pollution.

This series of industrial dehumidifier uses honeycomb rotor system for carrying out dehumidifying operations, so that the surrounding air of mould remains at a low dew point temperature ranging from +5℃ to -10℃. Our mold sweat dehumidifier can provide constant low dew point surrounding air without being influenced by season. This plays a significant role in reducing defective rate.

Features
1. Our industrial dehumidifier is equipped with P.I.D. temperature control system that has temperature re-setting and real-time temperature display functions.
2. Honeycomb design ensures constant air dehumidifying effect.
3. Main power switch is fitted for safe operation and maintenance.
4. This mold sweat dehumidifier is designed with motor overload and reverse phase alarm functions.
5. Return air cooling and filtering functions are designed.
6. Air humidity can be precisely controlled under normal atmospheric conditions.
7. This industrial dehumidifier can help prolong the service life of molds, reduce corrosion, improve product quality and decrease defective rate.

Configuration
Siemens appliances, ARICO Technology circuit board, Sweden zeolite honeycomb, GREENCO blower, JSCC gear motor, and US heat-resistant duct.

Technical Parameter

Model	TMD-500H	TMD-1000H	TMD-1500	HTMD-2000H
Regenerative Heater (kW)	4	7	12	7 × 2
Regenerative Blower (kW)	0.4	0.85	1.6	0.85 × 2
Drying Blower (kW)	0.75	1.5	2.2	3.7
Drying Air Flow (m3/hr)	500	1000	1500	2000
Diameter of Drying Air Duct (inch)	2	2.5	4	4
Socket Size	3/4"PT	3/4"PT	1"PT	1.5"PT
Drying Air Temperature (℃)	30	30	30	30
Dew Point Temperature (℃)	-10 to +5	-10 to +5	-10 to +5	-10 to +5
Blower Pressure (pa)	1	1500	1500	2400
Cooling Water Flow (L/M)	45	90	135	180
Water Pressure (kgf/cm2)	3 to 5	3 to 5	3 to 5	3 to 5
Dimensions (H × W × D) (mm)	1745 × 700 × 1255	1935 × 900 × 1380	2060 × 1410 × 2150	2060 × 1410 × 2150
Weight (kg)	260	335	350	450